TA100 Pro - Checking HandPunch Calibration
Summary
The following procedure describes what you would need to do to check the calibration scores on your Hand Punch clock.
The clock calibration is based on these three metrics: row, column and exposure. The typical score and range for a well calibrated clock is as follows:
Row 0 +/- 3
Column 0 +/- 3
Exposure 100 +/- 20
A supervisor may check the calibration score on a clock with the following procedure:
1. Press Clear
2. Press Enter
3. Enter your supervisor ID
4. Press Enter
5. Press 1 (when prompted to enter password)
6. Press Enter
7. Select "Yes" (when prompted to calibrate)
8. Note down your "r" "c" and "e" (row, column and exposure) calibration scores
9. Press Clear twice
Article
KB0009 Published 13th Sep 2013
Keywords: HP HandPunch
THE INFORMATION IN THIS DOCUMENT IS PROVIDED ON AN AS-IS BASIS WITHOUT WARRANTY OF ANY KIND. PROVIDER SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL PROVIDER BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, SPECIAL OR INCIDENTAL DAMAGES, EVEN IF PROVIDER HAS BEEN ADVISED BY USER OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE. USER AGREES TO HOLD PROVIDER HARMLESS FROM AND AGAINST ANY AND ALL CLAIMS, LOSSES, LIABILITIES AND EXPENSES.
Warning [2]
file_get_contents(doc/VERSION): failed to open stream: No such file or directory in htmlfooter.inc.php @ line 27 file_get_contents() include()
SiT! v3.67 p2 (18 August 2012)
Revision Build No.
Knowledge Base Article